Identify parts of the E-Cig that constitute voltage, current, and  resistance. Discuss the role each plays in the E-Cig and typical values  for each including units.

    • Identify parts of the E-Cig that constitute voltage, current, and  resistance. Discuss the role each plays in the E-Cig and typical values  for each including units.

E-Cigs (or vapes) consist of a battery, typically lithium-ion, that  connects to a single or dual heating coil into the reservoir of vape  liquid. I’m going to use the specs for a vape that I’m currently using,  called the Elf Bar BC5000. It consists of a 650mAh (nominal voltage is  3.7 V) rechargeable lithium-ion battery, a dual coil, and a cotton  reservoir filled with 13ml of juice (nicotine salts). As a user hits or  pulls air from the mouthpiece, the airflow activates a sensor switch to  the battery and sends current through the circuit to the atomizer which  houses a coil(s). The coils offer resistance. The only resistance  information I could find for Elf Bar mesh coils is around 1.2 ????. The  lower the resistance, the more heat and vapor are produced, and the  stronger the hit. The higher the resistance, the less vapor and heat are  produced and smoother the hit. The coil(s) heats the “wick” which is  typically cotton inside of a reservoir filled with juice creating vapor  which expels through the mouthpiece. Using Ohm’s Law and assuming the  resistance is 1.2 ????, we can determine the current for this disposable  vape is 3.7V/1.2 ????=3.08333333A.

    • Discuss the electrical dangers of an E-Cig. Give specific examples.

One of the primary electrical dangers associated with E-Cigs or vapes  are the batteries. The type of batteries used in these devices has been  unregulated. Lithium-ion batteries can be dangerous if they become  damaged or over-heated. The chemical within the battery reacts to oxygen  and can combust. If this happens while in use or carried by and  individual, serious injury can occur.

    • There are many electrical safety rules.  Pick one, and discuss its application on a small system, such as the E-Cig.

It is important to know the requirements for each specific device.  Due to the sensitive nature of lithium-ion batteries, it is important to  handle them with care. Use the correct charger that comes with the  device or charger specified. Be sure to charge away from flammable  materials and do not leave the device charging overnight or for extended  periods of time.

References:

Center for Tobacco Products. (2022, February 16). Tips to Help Avoid Vape Battery or Fire Explosions. U.S. Food And Drug Administration. https://www.fda.gov/tobacco-products/products-ingredients-components/tips-help-avoid-vape-battery-or-fire-explosions 

 Links to an external site.

Cozens, N. (2022, July 6). Elf Bar ELFA Prefilled Pod Kit Review – The Sustainable Idea Of No Wasted Battery. Ecigclick. https://www.ecigclick.co.uk/elf-bar-elfa-prefilled-pod-kit-review/ 

 Links to an external site.

Electric Tobacconist. (n.d.). What is coil resistance? The Electric Tobacconist Ltd. https://help.electrictobacconist.co.uk/support/solutions/articles/5000758291-what-is-coil-resistance- 

 Links to an external site.

Rubery, H. (2022, August 30). Why Do Disposable Vapes Taste Better? https://www.podsalt.com/blog/post/why-do-disposable-vapes-taste-better 

 Links to an external site.

Velvet Cloud. (2018, June 19). Ohm’s Law 101 and E-Cig Tech: Understanding Vape Electrical Lingohttps://velvetcloud.com/blogs/news/ohms-law-101-and-e-cig-tech-understanding-vape-electrical-lingo 

 

USEFUL NOTES FOR:

Identify parts of the E-Cig that constitute voltage, current, and resistance. Discuss the role each plays in the E-Cig and typical values for each including units.

Introduction

The E-Cig has many parts, but the most important ones are voltage and current. In this article we’ll discuss what those terms mean and how they relate to the E-Cig.

The E-Cig has a resistance in the atomizer, which heats up and vaporizes the liquid.

The E-Cig has a resistance in the atomizer, which heats up and vaporizes the liquid. The resistance of this part is measured in Ohms (Ω). The higher this number is, the less current flows through it; therefore, you will be able to get more vapor from your device with less power consumption.

The lower your device’s resistance is, however, then more current will flow through it and therefore you’ll be able to get even more vapor out of your device with less power consumption!

A E-Cig battery supplies energy to the heating element of the E-Cig.

A E-Cig battery supplies energy to the heating element of the E-Cig. This heating element is what powers your atomizer and heats up your e-liquid, so it’s important that you have a good battery.

The battery is your heart in an E-Cig, because it supplies power to everything else on board! When you take a puff, your atomizer receives power through its connection with your voltage regulator (which we’ll discuss shortly), which then sends current down through wires into this little metal rectangle on top of your vape pen called “atomizer.” The atomizer heats up all those chemicals inside until they turn into vapor—and voila! You’re vaping again!

The main job of any electronic device such as yours out there today is processing information as quickly as possible without getting too hot or breaking down under pressure; this means having high quality components like ones made with lithium ion batteries (LiIon) instead than old fashioned alkaline ones like AA batteries would cause problems down road due

The voltage regulator converts or recreates the changing voltage from current draw and into a steady 3.7 volts, ensuring that a consistent amount of power is fed to the atomizer.

The voltage regulator converts or recreates the changing voltage from current draw and into a steady 3.7 volts, ensuring that a consistent amount of power is fed to the atomizer.

The resistance of an electrical circuit is measured in ohms (Ω). Resistance is often used as an indicator of how hard it will be for electrons to flow through a circuit; higher resistance means more difficulty for electrons to pass through and vice versa.

The resistance of a E-Cig is measured in Ohms (Ω).

The resistance of a E-Cig is measured in Ohms (Ω). The resistance of the atomizer is the most important component of an E-Cig because it determines how much vapor you’ll get from your vaporizer. The material used to make it also plays a role in determining its resistance, but this can vary depending on what type of atomizer you’re using.

If a battery has higher mAh rating, that means it will last longer because it has more stored energy. Voltage is measured in Volts (V).

If a battery has higher mAh rating, that means it will last longer because it has more stored energy. Voltage is measured in Volts (V). The ability to hold a charge is measured in milliAmpere-hour (mAh), and can be thought of as the capacity of your E-Cig battery.

Higher mAh ratings mean longer runtimes and better performance for users who need long periods of time between charges.

Current is measured in milliAmpere-hour (mAh) and relates to how long a battery can keep operating before needing to recharge.

The current is measured in milliAmpere-hour (mAh) and relates to how long a battery can keep operating before needing to recharge. The term “milli” refers to the decimal point, which gets multiplied by 1,000 when you move from one mililiter (0.001 liters) of water to one liter of water.

The current is also referred to as mA or μA depending on its size relative to other units used for measurement purposes—for example, 0.01 mA could be called “1 microampere” or 0.001 μA could be called “100 nanofarads” (NF).

Understanding these concepts will help you build your own E-Cig.

Understanding these concepts will help you build your own E-Cig. Understanding how the E-Cig works and how to use it is crucial for any vaper, no matter what level of expertise they have with vaping.

Conclusion

We hope you’re now familiar with the different parts of your E-Cig and how they work together to produce vapor. If you need help understanding the terms we used here, check out our E-Cig 101 post or ask us any questions on social media!

Place your order
(550 words)

Approximate price: $22

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read more

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read more

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read more

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more